English
English
5
6
4.
Press and hold either SKIP UP or SKIP DN button to search backwards or forwards, at high
speed, a particular point of track.
Note:
Low level audio will be heard during the search process to assist in locating the correct
point in the track.
REPEAT PLAYBACK WITH CD
1.
Press the PLAY/PAUSE button (16).
2.
To repeat the same track, press the REPEAT button (17) once. The indicator ‘REPEAT’
symbol appear on the display.
The CD will start single repeat playback until STOP button (2) is pressed. Press the REPEAT
button 3 times more to cancel single repeat. The indicator ‘REPEAT’ disappears from the
display.
3.
To repeat the entire disc, press the REPEAT button (17) twice. REPEAT ALL will appear on
the display.
Press the REPEAT button (17) button 2 times more to cancel all disc repeat. The indicator
REPEAT disappears from the display.
PROGRAMMED PLAYBACK FOR CD
1.
Press the PLAY/PAUSE button (16) and after 5 seconds the STOP button (2).
2.
Press the PROG button (12). The track number “Prog-01” will appear and “PROG” will
appear on the display indicating the first selection.
3.
Press SKIP DN (9) or SKIP UP (:) button to select the desired track to be programmed. The
track number which will be programmed will appears on the display.
4.
Press once the PROG button (11) to enter the track into memory. “P-02” will appear.
5.
Repeat the steps 3 and 4 to program up to 20 CD tracks.
6.
Press PLAY/PAUSE (
II
) button (16) once to start programmed playback.
7.
To cancel programmed playback, press the STOP button (2) twice.
Note:
During program playback, if you wish to repeat the entire programmed playback, press
the REPEAT button (17) repeatedly until the “REP” indicator appears on the display.
IMPORTANT
Since movement of the CD mechanism and the sensitive circuitry may cause interference to a
radio tuner nearby switch this unit off while operating other radio devices.
This product utilizes a laser
Danger -
Invisible laser radiation when opened and interlock failed or defeated. Avoid
direct exposure to the beam.
Caution -
Use of controls, adjustments, or procedures not listed in this manual may result in
hazardous radiation exposure.
Concerning Compact Discs
Only compact discs identified with this mark can be used with this
player.
SPECIFICATIONS
Power Supply
AC:
230V ~ 50Hz
Batteries:
6 x UM-2
Radio Frequency Coverage
FM:
87.5 - 108 MHz
MW:
540 - 1600 kHz
General
Headphones:
3.5mm stereo jack plug, 8-32 Ohm
CD Player
Pick Up:
3-Beam. Semiconductor Laser
Encoding:
16-Bit Linear
Note:
Specifications and the design are subject to possible modifications without notice due to improvement.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
This marking shown on the product or its literature, indicates that it should not be
disposed with other household wastes at the end of its working life. To prevent possible
harm to the environment or human health from uncontrolled waste disposal, please
separate this from other types of wastes and recycle it responsibly to promote the
sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product,
or their local government office, for details of where and how they can take this item
for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions
of the purchase contract. This product should not be mixed with other commercial
wastes for disposal.
