1
English
LOCATION OF CONTROLS
1.
POWER ON
-
OFF
2.
MODE
3.
INFO/MENU
4.
PRESET
5.
C/
-
6.
SELECT
7.
/
-
8.
EARPHONE JACK
9.
DC IN
10.
BATTERY COMPARTMENT
11.
AUX IN JACK
PRECAUTION
•
INSTRUCTIONS
-
All the safety and operating instructions should be read before
the radio is operated. The manual should be retained for future reference.
•
HEED WARNINGS
-
All warnings on the appliance and in the operating instruc-
tions should be adhered to.
•
WATER AND MOISTURE
-
The appliance should not be used near liquids or in
rooms with a high level of humidity.
•
VENTILATION
-
The appliance should be situated so that its location or position
does not interfere with its proper ventilation.
•
HEAT
-
The appliance should be situated away from heat sources such as radia-
tors, stoves or other appliances that produce heat.
•
POWER SOURCE
-
The radio should be connected to power supply only of the
type described in the operating instructions or as marked on the appliance.
•
POWER CORD PROTECTION
-
Power supply cords should be routed so that
they are not likely to be walked on or pinched by items placed upon/against
them.
•
OBJECT AND LIQUID ENTRY
-
Care should be taken so that objects do not fall
and liquids are not spilled into the enclosure through openings.
•
DAMAGE REQUIRING SERVICE
The appliance should be serviced by qualified service personnel when:
-
The power supply cord or plug has been damaged;
-
Objects have fallen into or liquids has been spilled into the radio;
-
The appliance has been exposed to rain;
-
The appliance has been dropped or the enclosure damaged;
-
The appliance does not appear to operate normally.
•
SERVICING
-
The user should not attempt to service the appliance beyond that
descrive in the user operating instructions. All the servicing should be referred to
qualified service personnel
Note:
If the display does not function properly or no reaction to operation of any con-
trol may due to the electrostatic discharge. Switch off and disconnect the AC cord and
remove all the batteries, then turn the power back on after a few seconds.
