2
English
Cautions:
•
DO NOT mix rechargeable (Nickel
-
Cadmium) and regular (Carbon
-
zinc) batte-
ries.
•
DO NOT charge continuously for 24 hours or more, otherwise it will deteriorate
the performance of the rechargeable batteries.
•
DO NOT try to recharge normal (not rechargeable) batteries. They can explo-
de!
Notes:
•
If the rechargeable batteries are being charged for the first time, it will take ap-
proximately 15 hours to be fully charged.
•
If the operating time decreases drastically even when the rechargeable batte-
ries are properly recharged, purchase a new set of rechargeable batteries.
AUTO POWER
-
OFF
When the unit is stopped for approximately 30 seconds, the Auto Power Off function
will activated and turn the unit off automatically.
CD
-
MP3 OPERATION
1.
Connect your earphones into the
[HEADPHONES SOCKET]
(11);
2.
Press
[OPEN]
(8) to open the
[CD DOOR]
(9) and place a CD with the label up in
the CD compartment;
3.
Close the
[CD DOOR]
(9);
4.
Press
[PLAY]
(2). Focus search is performed and playback will start automati-
cally from the first track;
5.
Adjust the volume with the
[VOLUME KNOB]
(10) to the desired level;
6.
To turn the unit off, press the
[STOP]
button (3) twice.
Note:
•
Press
[PLAY
-
PAUSE]
(2)to play. When it plays, press to stop playback tempo-
rarily and press again to resume playback.
•
Press
[STOP¨]
(3) when you want to finish playback. Press twice to switch
OFF the unit.
•
Press
[SKIP
-
]
(4) to go to the previous track, press & hold to go back fast.
•
Press
[SKIP +]
(5) to go to the next track, press & hold to go fast forward.
PROGRAMMING
Up to 99 tacks (MP3, 20 in CD) can be programmed and play in any order.
1.
Stop the playback by pressing
[STOP]
(3);
2.
Press
[PROGRAM]
(6), the display (1) will show the number of the track
on the left side and the number of program on the right side.
3.
Select desired track by using
[SKIP
-
/+]
buttons (4/5);
4.
Press
[PROGRAM]
(6) to confirm desired track into the program
memory;
5.
Repeat step 3 and 4 to enter additional tracks into the program memory.
6.
When all the desired tracks have been programmed, press
[PLAY]
(2) to play the
disc in the order you have programmed.
Note:
Press
[STOP]
(3) to terminate programmed play.
