4
English
TAPE OPERATION
1.
Select
“
TAPE
”
mode by pressing the
[FUNCTION]
(2)button;
2.
Press
[STOP/EJECT]
(15.2) button to open the cassette door (12) and insert your
tape;
3.
Close the cassette door (12);
4.
Press
[PLAY]
(15.5) button to start playing tape.
5.
Press
[PAUSE]
(15.1) button when you want to stop playing tape operation tem-
porarily,
press again to resume tape operation.
6.
Press
[STOP/EJECT]
(15.2) button when finished,
press again to open the cas-
sette door.
7.
Press
[F.FWD]
(15.3) button or
[RWD]
(15.4) button to
start rapid tape winding
forward / reverse direction.
CD
-
MP3 OPERATION
1.
Select the CD mode with the
[STANDBY / FUNCTION]
(2) button, until
“
Cd
”
is
shown in the display.
2.
Insert an audio CD with the printed side facing upwards and
then close the lid of
the CD compartment.
3.
In order to remove a CD, please press the
[PRESET/FOLDER/STOP]
(4) button,
open the CD compartment and lift the CD out carefully.
4.
During the playback of MP3 disc, you can press and hold
[PRESET/FOLDER/
STOP]
(4) button the display will show
“
FOld
”
then press
[SKIP+ / ]
&
[SKIP
-
/ TUNING
-
]
(5
-
6) buttons to chose folder.
Programmed Play
This can be used to program any desired sequence of tracks.
1.
Press the
[PRESET / FODER/STOP]
(4) button.
2.
Press the
[SCAN / MODE]
(11) button.
“
P01
”
(Storage space) and the notification
“
PROG
”
will appear in the display.
3.
Use the
[SKIP+ / ]
&
[SKIP
-
/ TUNING
-
]
(5
-
6) buttons to select the desi-
red track and then press the
[SCAN / MODE]
(11) button again.
4.
The display changes to memory slot P02.
5.
Select the next track with the
[SKIP+ / ]
&
[SKIP
-
/ TUNING
-
]
(5
-
6) but-
tons and press the
[SCAN / MODE]
(11) button again. Repeat the procedure until
all the desired tracks are selected.
NOTE:
1.
Once the storage capacity of the tracks to be programmed has been reached
“
FUL
”
flashes in the display.
2.
Press the
[CLOCK / PLAY / PAUSE]
(3) button. The playback starts.
3.
To delete the program, press
the [PRESET / FOLDER/STOP]
(4) button twice.
The notification
“
PROG
”
will disappear.
