56
Other Switches Continued:
Patio Lights
On the monitor panel, the top left switch is the patio light switch. Press the top of the button to turn the lights on, and the bottom to turn them off.
These are LED lights and use very little power. (Picture 55.1 on Previous Page)
Water Pump Switch
The top right switch is the water pump switch. It should be on only when you have water in the fresh water tanks and wish to use the sinks,
showers, or toilet. The pump should not be on without water in your tanks or water supplied from an exterior water connection source. As with the
patio light switch, pressing the top of the button turns the pump on, and pressing the bottom turns it off. (Picture 55.2 on Previous Page)
Tanks and Charge Indicators
The battery-charge-level indicator is located directly to the right of the battery disconnect switch.
The fresh, grey, and black water tank levels are located just under the Roadtrek Logo. The button
to check these levels are located just beneath the level indicators. Your battery disconnect switch
must be on for these displays to work. Press the button for each to see the display. These will give
you an approximate reading, to the nearest third, of how much is in each tank. The four indicator
levels for the water tanks are full, 2/3, 1/3 and empty. (Picture 56.1)
*Note - Black and Grey water tank capacities can vary depending on options and
configurations.
Fresh, Grey and Black Tank Indicators.
Picture 56.1
Roadtrek Inc.
