29
© Erwin Hymer Group North America, Inc., R00
Water Pump
To use the water in the tank, you need to turn on the water pump. See photo above for switch location.
Waste Water
Gray Tank
Galley sink, bathroom sink and shower drain water drains into the gray water tank. The shower and sink have traps to prevent tank odors from entering the
living space. Be sure to replace the screw-in plug in the shower floor after use to prevent gray water from sloshing up into the shower pan from the gray water
tank while driving.
Black Tank
The black water tanks contains toilet waste. Please refer to the HOWTO: Waste Water Dumping section for an explanation of which materials you can and
can't flush down the toilet.
Indicators
The gray and black water tank level indicators on the control panel will give you an approximate indicator of your tank levels. When the gray water tank is full to
capacity, water will no longer drain down the shower and sink drains, and you need to dump the tank before running any more water. If you see fluid below the
toilet valve in the bowl of the toilet, your black water tank is full and also needs to be emptied before further use.
See Monitor Panel for more information.
Ensure that both the black and grey water gate valves are closed before using the waste
water system. It is possible for the valves to open slightly especially after extensive
driving. Black and grey water dump valves are accessed through the driver side storage
door.
Tank level and battery charge indicators on
monitor panel