- Open box, tilt onto open side, slide box up
- Undo 4 cover straps
- Set extrusion rails aside
- Undo 2 side straps
- Open tent, remove ladder, cover, boot bags, gear
hammocks, and hardware bag, leave window poles,
close tent
- Flip to side with 4 holes
- Cut off plastic cover
- Align extrusion rails
- Slide nuts into rails
- Locate holes on opposite side, push bolts through
tape, tighten
- Flip tent
- Cut off plastic cover, remove tape
- Align brackets
- Locate holes on opposite side, push bolts through
tape, don’t tighten
- Align ladder, feed bolts through, tighten
- Tighten brackets
- Install boot bags and gear hammock
- Secure ladder strap
- Install cover
- Lift onto vehicle
- Drop botls through slides and slide into rails
- Sandwich rack with plate and tighten
- Install extrusion end caps
- Undo 4 straps
- Flip back cover, slide out of frame
- Undo side straps
- Undo ladder strap
- Extend ladder, use to lever open
- Pull out ladder awning pole, flip out brackets,
insert, velcro
- Grab bag of poles, insert into frame, bend and
insert in awning
- Roll up window covers
- Lift ladder, zip on annex, zip on floor
- When closing, use bungees
- Remove cover
- Insert annex cord into frame
- Fold up ladder
- Zip annex on
- Layout and zip on floor
- Fold ladder back down
CONTENTS
What’s in the Box!? . . . . . . . . . . . . . . . . . . 3
Some Assembly Required . . . . . . . . . . . . . 4
Installing the Mounting Rails . . . . . . . . . . . . . . . . . 4
Installing the Ladder . . . . . . . . . . . . . . . . . . . . . . . . 4
Installing the Boot Bags and Gear Hammock . . 5
Installing the Cover . . . . . . . . . . . . . . . . . . . . . . . . . 5
Vehicle Install . . . . . . . . . . . . . . . . . . . . . . . 6
Setting Up Camp . . . . . . . . . . . . . . . . . . . . 7
Setting Up the Tent . . . . . . . . . . . . . . . . . . . . . . . . . 7
Setting Up the Annex . . . . . . . . . . . . . . . . . . . . . . . 8
2
