Roav DashCam Duo, User Manual

08   English

English   09

 Adhere the 3M sticker onto the windshield and rotate the lock 

as indicated. 

 Use the crowbar to press and hide the charging cable into the 

seams and weatherstrips around the edge of the dashboard. 

 Adjust the lens viewing angle to ensure that it is aligned with the 

road ahead, then rotate the fixing knob to fasten.

Do not install DashCam on an uneven surface as the 

suction mount will be likely to detach. 

Connect to Power

There are two ways to connect to power. 

A) Use the provided charging cable 

 Connect the car charger to DashCam Duo using the charging 

cable.

 Plug the other end of the car charger into your vehicle’s cigarette 

lighter socket. 

B) Use the hardware kit (not provided)

 Connect one end to the micro USB port by using the hardware kit. 
 Plug the other end of the hardware kit into your vehicle’s OBD 

port. 

 Once the car engine has started, DashCam will automatically 

power on and start recording. Once the car engine has shut 

down, DashCam will automatically save the recording and turn 

off. 

 Using Your DashCam 

As a driver, you have full responsibility to drive safely and 

adhere to all applicable traffic regulations.

Record Videos

This DashCam features dual recording modes. The cameras 

will capture the road in front as well as your car’s interior at the