Page: 4
OPERATION
All models of toasters are capable of toasting and grilling on both sides at once or on
the top only. They also have the flexibility to be controlled with the timer or the energy
regulator(s) depending on your requirements. However, the way in which these
methods of use are carried out varies slightly between the models. Refer to the
sections below for instructions relating to your particular model.
In all cases the machine must be switched on by the On/Off rotary switch into the
"TOP & BOTTOM" or “TOP ONLY” position. With the switch turned to either of these
positions, the main power pilot light should become illuminated to indicate the power
is on.
CONTROL DESCRIPTION
On/Off
Switch
The On/Off Switch controls power to either the top element only or
both top and bottom elements.
To switch on the top element only, rotate the switch anticlockwise. To
switch on both top and bottom elements, rotate the switch clockwise.
With the switch in either position,
the green pilot light will
illuminate.
Energy
Regulator
The Energy Regulator cycles power to the elements. With the dial set
to high, the elements are constantly on providing maximum heat. Any
other setting on the dial will vary the on/off cycle time in turn varying
the total heat produced by the machine. With the dial set to off, no
power will be applied to the elements. The on/off state of the elements
is indicated by the two amber pilot lights.
Timer
The 5 minute timer allows the user to override the Energy Regulator,
providing full power to the elements for the period of time set with the
timer dial. An audible ding will occur indicating when the set time
period elapses. Control will then revert back to the energy regulator.
Using the Energy Regulator at an idle setting between timer activation
will keep the machine warm, reducing toasting time
On/Off Switch
Energy Regulator
Timer
Top and Bottom Elements
on
Top Element
On