In automatic mode the charger sets the optimum current and voltage values automatically;
this mode is available only for NC and NiMH batteries. Press the ‘MODE’ button to select
the three available processes (CHARGE, DISCHARGE, DISCHARGE - CHARGE) for
these two battery types.
If a battery is connected, pressing the ‘START’ button initiates the process you have
selected. An audible beep now sounds, and the screen display changes to show the char-
ge parameters. The top line shows the process - Charge (L) or Discharge (E) - and the
charged-in or discharged capacity. The top line also displays the time elapsed since the
start of the process. The bottom line shows the battery type, the current battery voltage
and the charge current. The current display alternates with the word ‘auto’ to indicate that
the charger is in automatic mode.
Pressing the ‘STOP’ button at any time interrupts the process, and the screen reverts to
the Automatic Mode display. At the end of the process, when the battery is fully charged or
discharged, the screen shows the final values (charged-in or discharged capacity, process
duration, battery type, battery voltage and current).
Operating instructions
POWER PEAK TRIPLE EQ-BID
Order No.
8541
10
© robbe Modellsport
‘MODE’
button
‘START’
button
‘START’
button
‘MODE’
button
‘MODE’
button
‘MODE’
button
‘START’
button
‘START’
button
‘MODE’
button
‘START’
button
‘MODE’
button
‘START’
button
6.1 Menu structure, automatic mode (NC and NiMH only)
Summary of Contents for 8541
