Order Number
40 MHz No. F4044
FC-16 Boat `n Truck
17
Multi-Prop Module
No. F1512
This module is designed for controlling auxiliary functions, and
expands one proportional channel on the transmitter to provide 8
proportional functions. It provides accurate, simultaneous control
of 8 channels.
Multi-Switch-16 Module
No. 8084
This module is designed for controlling auxiliary functions, and
expands one proportional channel on the transmitter to provide
16-switched functions.
Multi-Switch-Prop 12+2 Module
No 8101
Optional module for controlling auxiliary functions; ex-
pands one proportional channel on the transmitter to pro-
vide 12-switched functions and 2 proportional servo channels.
This is a combination module, which covers most requirements.
Multi-Switch Prop Module Light Set
No 8413
Optional transmitter module for controlling auxiliary functions; ex-
pands one proportional channel on the transmitter to provide 14
switched functions and 1 servo channel. Designed specifically
for use with the Truck super lighting set, but can also be used in
conjunction with any other Multi decoder.
Multi-Prop 8 Decoder
No 8042
Multi-Decoder for proportional channel expansion. Occupies only
1 servo channel but can control 8 servos or speed controllers
independently of each other.
Multi-Switch 16 Decoder Memory
No 8369
For each Multi-Switch module in the transmitter you need one de-
coder at the receiver end. This takes up only one servo channel,
and can switch 16 channels directly. Operating voltage 4.8 - 24
Volts, up to 1.8 A per output.
Multi-Switch-Prop 12+2 Decoder Memory
No 8370
For each Multi-Switch module in the transmitter you need one de-
coder at the receiver end. This takes up only one servo channel,
and can switch 12 channels directly as well as providing 2-servo
channels. Operating voltage 4.8 - 24 Volts, up to 2.7 A per output.
Light Set for Trucks
No 8411
Microprocessor controlled decoder module, providing full
control of scale lighting systems in model vehicles such as
trucks etc., plus proportional control of auxiliary functions.
This module can control the entire usual standard and flashing
light functions; the unit monitors the RC system’s throttle channel
constantly, and uses that data to control the brake lights and re-
versing lights automatically.
In addition, there are 2 proportional servo channels controlled by
switches.
The system includes zero-contact control signal transfer to the
Trailer lighting set by means of a pulse-modulated infrared signal.
