12
11. Installing the motor
Screw the motor mount to the fuselage, then fix the
motor assembly to the motor bulkhead as shown.
If you are using the FW5055 motor set, please note
that the 4 mm thick spacer washers included in the
set must be positioned between the motor mount
and the motor flange.
12. Installing the wing
Locate the retaining lug in the centre of the wing,
and insert it in the corresponding slot in the un-
dercarriage former.
Fix the wing to the fuselage using the two M4 x
30 screws, 4 I.D. x 12 mm O.D. washers and the
plywood reinforcement (see illustration).
11
12
4 I.D. x 10 mm O.D.
M4 x 30 mm
4 I.D. x 12 mm O.D.
Building and Operating Instructions - ZLIN 50LX Red Bull 1600mm ARF
No. FW004004
2 mm plywood reinforcement
M4 x 25 mm
