2
Contents
Page
Contents 2
Safety Notes
3, 4
Important notes
5
Set contents / Specification / Essential and recommended accessories
6
Installing the aileron / Installing the aileron servo
7
Wing joiner / Installing the tailplane
8
Installing the tailwheel, rudder and elevators
9
Installing the tailplane struts
9
Installing the elevator linkage
10
Installing the rudder linkage
10
Installing the servos / Installing the undercarriage
11
Installing the motor / Installing the wing
12
Cowl and canopy / Centre of Gravity, control surface travels
13
Test-flying, flying notes
14
Replacement parts list
15
Dear fellow-modeller,
Congratulations on purchasing the robbe Flite-
work ZLIN 50LX Red Bull 1600 mm; this ver-
sion is produced by one of the world's finest
model manufacturers. We also wish to thank
you for the trust you have shown in us by bu-
ying the model. We hope you have many en-
joyable hours flying the robbe Flitework ZLIN
50LX Red Bull 1600 mm.
CAUTION!
Radio-controlled model aircraft are not toys! A
high level of technical expertise and modelling
experience are required to complete, fly and
maintain this model aeroplane. Assembling and
handling the model and its technical equipment
carelessly and inaccurately can result in serious
personal injury and property damage.
Building and Operating Instructions - ZLIN 50LX Red Bull 1600mm ARF
No. FW004004
