2
ArcSource 4 MC II
The module generates colored light by means of RGBW LED multichip.The product was designed to use with
the ArcPower drivers and for indoor use only.
1.Attention
Do not install the module near high inflammable liquids or materials.
Do not allow anything to rest on the module.
Do not use the module near high humidity or water or expose to the rain.
Do not install the module near the naked flames.
Do not install the module in dirty,dusty or badly ventilated location.
Sufficient air accessing to the cooling ribs of the module housing has to be ensured.
Use the standard MR16 fittings to fix the modules on a suitable place.
2.Installation
The ArcSource unit should be connected to the ArcPower drivers as stated in technical specifications. See the
ArcPower drivers user manuals for full details of mains power requirements and DMX operation.
ArcSource unit is supplied with 1.5 m of cable for direct connection to the ArcPower drivers.
CAUTION!
Avoid looking directly into the LED light beam at close range!
Maximum possible number of LED modules connected to the one ArcPower 36 (or one LED output of the
ArcPower 72/144/360/16x6/RackUnit) is mentioned in the table below.
LED module
LED multichips
Max.number
of connected
modules
Compatible LED drivers
ArcSource 4 MC
1
10
ArcPower 36/72/144/360
ArcSource 4 MC
1
2
ArcPower 16x6
ArcSource 4 MC
1
12
ArcPower Rack Unit