Robe clubspot 500 CT, User Manual

4

5

Never run the device without lamp!

Do not shake the device. Avoid brute force when installing or operating the device.

Never lift the fixture by holding it at the projector-head, as the mechanics may be damaged. Always hold the fixture at the 

transport handles.

When choosing the installation-spot, please make sure that the device is not exposed to extreme heat, moisture or dust. 

There should not be any cables lying around. You endanger your own and the safety of others!

The minimum distance between light-output and the illuminated surface must be more than 2 meters.

Make sure that the area below the installation place is blocked when rigging, derigging or servicing the fixture.

Always fix the fixture with an appropriate safety-rope. Fix the safety-rope at the correct holes only.

Only operate the fixture after having checked that the housing is firmly closed and all screws are tightly fastened.

The lamp must never be ignited if the objective-lens or any housing-cover is open, as discharge lamps may explose and 

emit a high ultraviolet radiation, which may cause burns.

The maximum ambient temperature 40° C must never be exceeded. Otherwise, the lamp is switched off and the fixture 

is out of operation for 5 minutes.

CAUTION!  The lens has to be replaced when it is obviously damaged,

so that its function is impaired, e. g. due to cracks or deep scratches!

Operate the device only after having familiarized with its functions. Do not permit operation by persons not qualified for 

operating the device. Most damages are the result of unprofessional operation!

CAUTION!  The lamp has to be replaced when it is damaged

or deformed due to the heat!

Please use the original packaging if the device is to be transported.

Please consider that unauthorized modifications on the device are forbidden due to safety reasons!

If this device will be operated in any way different to the one described in this manual, the product may suffer damages 

and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-circuit, burns, electric 

shock, burns due to ultraviolet radiation, lamp explosion, crash etc.

3. Description of the device

1

 - Moving head

2 

- Yoke

3

 - Base

4

 - Handle