8
Touch any part of the screen or press the [ENTER/Display On] button to display the initial screen with the cur-
rent stored DMX address:
Touch the green arrow at the bottom right corner of the screen or press the [ENTER/Display On] button to enter
the " Address" menu.
An item (such as a Tab, menu item, text box, icon) may be selected from a screen by simply touching the item
in the list or by pressing the [NEXT] or [PREV] buttons to scroll through list items. With each press, the next
item is highlighted. Press [ENTER/Display On] to select the highlighted item.
Before first fixture operation, set current date and time in the menu "Date &Time
Setings" (menu path: Personality--> Date &Time Setings).
7.1 Tab " Address"
Settings
-
Select the menu to set desired fixture address setting.
DMX Address
-
Select the menu to set the DMX start address
.
Ethernet Settings
-
The menu allows all needed settings for the Ethernet operation
Disable -
The option disables Ethernet operation.
Artnet
- Fixture
receives Artnet protocol
gMAI
- Fixture
receives MANet I protocol
gMA2
- Fixture
receives MANet protocol
Art2DMX
- Fixture receives
Artnet protocol from the Ethernet input and sends DMX
data to its DMX output (fixture works as an "Artnet/DMX converter", next fixture can
be connected to its DMX output and you can build a standard DMX chain by
connecting another fixtures. Only one fixture has to be connected to the Ethernet.
IP Address/Net Mask
- Select this menu to set IP address. IP address is the Internet protocol
address.The IP uniquely identifies any node (fixture) on a network.
There cannot be 2 fixtures with the same IP address on the network!
Default IP Address
-Preset IP address, you can set up only first byte of IP address (2 or
10) e.g.
002
.0.05.086.
Custom IP Address
- The option enables to set up all bytes of IP address.
Net Mask
- The option enables to set up all bytes of Net Mask.
.
ArtNet Universe
- Use
this item to set a Universe (0-255). The Universe is a single DMX
5 frame of 5 channels.
MANet Settings
- Use this menu to set parameters for MANet operation.
MANet Universe I/II
- The value of this item can be set in range -64.
MANet Session ID
- The value of this item can be set in range -3.
7.2 Tab "Information"
