22
If you use only one fixture, the function should be off (gobo switching is faster). For two or more
fixtures the function has to be on.
Slide Show Timer
-
The option sets time period (0 - 300 sec.) during which a gobo stay in
a position before changing during "Gobos presentation" function (channel 17/ Digital gobo
wheel/ DMX range of 251-252).
Optics Module
-Select the option " Wide Angle Lens" if an additional wide angle lens is installed
Fans
-
Fan mode
. Use the menu item to set the fixture fans to the auto-control mode ("Auto") or to the max.
fans power ("High").
Stand Alone
- The menu item allows you to customise playing of programs in the Stand Alone mode.
Input Overtake
-If the option is On and DMX signal from an external DMX controller has been
received,the currently played program is interrupted and fixture behaves according to DMX
signal.
WEB Server
- The menu item allows you to set some item (s) regarding the WEB interface operation.
Activate Password
-If the option is On, the password is required at entering the WEB interface.
Set Password
-If the option is On, the passwor
Wifi Access Point
- The menu allows you to witch On/Off access point .
Activate
Off
- The menu item switches the Access point off
On
- The menu item switches Access point on. The option allows you
a remote control of the fixture via a mobile phone or laptop.
The name of Wi-Fi network is
PromotionAP
, password is
promotion
.
Channel ID
- The menu item allows you to select desired channel.
NAS Client
- The menu item allows you to set a NAS client.
Activate
- The menu item "On" activated access to the NAS server (intended Promotion)
and allows synchronization of NAS client with the NAS server.
IP Address
- The menu item allows you to set an IP address of the Promotion which serves
as the NAS server.
Synchro Time
-The menu item allows you to set a time period (1 minute -600 minutes)
after which media content of the NAS client will be synchronized with the NAS server.
If the item is set at 0, no synchronization will run.
On PowerUp Sync
-The menu allows you to set a way of media content
synchronization on the client fixture during its powering up.
Off
- The synchronization during fixture powering up is disabled.
No Wait For Sync
- The synchronization runs on background, the fixture will respond
to a DMX controller during synchronization.
Wait For Sync
- The fixture waits for finishing of the synchronization and will not
respond to the DMX controller until the synchronization is finished.
Note: During the media content synchronization, files from the internal USB flash drive of the NAS server are
copied to the internal USB flash drive of the NAS client (new or changed files only).
Reset to Defaults
- The menu item allows you to set all fixture parameters to the default (factory) values.
5.4 Manual Control
Manual DMX Control
- The menu allows you to manually control each effect channel of the fixture.
LED Engine
- The menu allows you to set some parameters for the LED Engine.
External Input
- Via the menu option is possible to activate the external input (HDMI).
Keystone Horizontal
- The item allows you to use LED engine horizontal keystoning
when the external input is active.
Keystone Vertical
- The item allows you to use LED engine vertical keystoning
when the external input is active.
Led On/Off
- The item allows you to switch the LED engine off when the external input is active.
Summary of Contents for Robin ProMotion ADM
Page 1: ...1 Version 1 7 ...
Page 50: ...40 ...
