background image

6

3. Installation

               Fixtures must be installed by a qualified electrician in accordance with all    

national  and local electrical and construction codes and regulatio

ns.

3.1 Connection to the mains

For protection from electric shock, the fixture must be earthed!

The Robin ProMotion is equipped with auto-switching power supply that automatically adjusts to any 50-60Hz 

AC power source from 100-240 Volts.

Install a suitable plug on the power cord (if it is needed), note that the cores in the power cord are coloured 

according to the following table. The earth has to be connected!

If you have any doubts about proper installation, consult a qualified electrician.

 

            Core (EU) 

  Core (US) 

    Connection   Plug Terminal Marking 

Brown   

     Black 

    Live      

               L

Light blue 

     White 

    Neutral 

 

  N

Yellow/Green       Green 

    Earth

This device falls under class one and must be earthed (grounded)!

Design of the Robin ProMotion allows to connect several fixtures to AC mains power in one interconnected 

daisy chain using power input and output connectors. Needed daisy chain cords are stated in the  chapter 

“Technical specifications “

The max. number of connected fixtures depends on the AC mains power voltage and fixture version: 

CE 

     

cETLus

 24 fixtures at power supply= 230V 

 

14 fixtures at power supply= 230V

 22 fixtures at power supply= 208V 

 

13 fixtures at power supply= 208V

 12 fixtures at power supply= 120V  

 

  7 fixtures at power supply= 120V

Actual numbers of fixtures may differ from values stated above as you have to take into account the length of 

supply cables, circuit breaker etc. at projecting of the fixtures installation Do not overload the supply line and 

the connecting leads.

Do not overload the supply line and the connecting leads.

Wiring and connection work must be carried out by qualified staff!

  

Summary of Contents for Robin ProMotion ADM



















































Reviews: