18
Colour F
a colour wheel (fine)
Efe Sped
an effect speed
Col. Time
a colour wheel time
Efe Time
a focus/frost/prism time
Gob Whel
a rotating gobo wheel
Rot Gobo
a gobo rotation
Rot Go F
a fine gobo rotation
Prism
a rotating prism
Prism Ro
a prism rotation
Frost
a frost
Focus
a focus
Focus F
a focus (fine)
Stro
a strobe/shutter
Dimm
a dimmer (coarse)
Dim F
a dimmer function (fine)
F.Tim
a fade time (0-25.5 sec)
S.Tim
a step time (0-25.5 sec)
COPY
copying the current prog. step to
the next prog. step
4. Press [ENTER] button to confirm adjusted value .
5. Press [ESCAPE] button, select next prog. step, press [ENTER] button and repeat steps 3 - 5).
6.7 Reset
This option enables the Robin Spote to index all effects and return to their standard positions.
6.8 Special functions (Special)
RDM Low
-
This menu item shows the first part of the RDM identification code
.
RDM High
-
This menu item shows the second part of the RDM identification code.
Wireless
-
Stat
- Use the menu to read wireless DMX status.
Unlink
- use this item to unlink the fixture from a wireless DMX transmitter.
Adjust
-
Adjustment
. The menu allows the fine adjustment of effects.
DMX Val
-
DMX values
. Use the menu to set DMX values of fixture´s channels.
Calib
- calibration fixture effects.
Cal Mech
- Use this menu to calibrate mechanical effects:
Pan C - a position of the pan
Tilt C - a position of tilt
Col C - a position of colour wheel
Pri C - a position of prism
Fro C - a position of frost
Gob C - a carousel of rotating gobos fine movement
GR1 C - fine movement of the rotating gobo 1
GR2 C - fine movement of the rotating gobo 2
GR3 C - fine movement of the rotating gobo 3
GR4 C - fine movement of the rotating gobo 4
GR5 C - fine movement of the rotating gobo 5
GR6 C - fine movement of the rotating gobo 6
GR7 C - fine movement of the rotating gobo 7
GR8 C - fine movement of the rotating gobo 8
GR9 C - fine movement of the rotating gobo 9
Store - saving adjusted values
Calibration of the pan/tilt via the control board
1. Disconnect DMX controller from the fixture and enter the "Cal Mech" menu.
2. Use the [PREV] and [NEXT] to find "Pan C" and press [ENTER].
