26
10.3 Checking plastic parts of the fixture
The plastic parts of the fixture should be checked for damages and beginning cracks at least every two months.
If hint of a crack is found on some plastic part, do not use the fixture until the damaged part will be replaced.
Cracks or another damages of the plastic parts can be caused by the fixture transportation or manipulation
and also ageing process may influence plastic materials.
This checking is necessary for both fixed installations and preparing fixtures for renting. Any free moving parts
inside of the fixture or any cracked plastic not sitting properly in place need to be immediately replaced.
10.4 Disposing of the product
To preserve the environment please dispose or recycle this product at the end of its life according to the local
regulations and codes.
