32
Frost 2/2
- a medium frost fine position movement 2
Fr. Shutters.rot
- a framing shutters module fine rotation (value range: 0-255)
Fr. Shutter 1 Move
- a Fram. lamella 1 fine moving
Fr. Shutter 1 Swiv.
- a Fram. lamella 1 fine swivelling
Fr. Shutter 2 Move
- a Fram. lamella 2 fine moving
Fr. Shutter 2 Swiv.
- a Fram. lamella 2 fine swivelling
Fr. Shutter 3 Move
- a Fram. lamella 3 fine moving
Fr. Shutter 3 Swiv.
- a Fram. lamella 3 fine swivelling
Fr. Shutter 4 Move
- a Fram. lamella 4 fine moving
Fr. Shutter 4 Swiv.
- a Fram. lamella 4 fine swivelling
Calibration of the effects via the control board
1. Disconnect DMX controller from the fixture and enter the "Calibrate Effects" menu.
2. Use the [up arrow] and [down arrow] to find "Pan" and touch it to enter the fine effect adjustment screen.
3. Set desired value and save it by touching the [confirm].
4. Repeat steps 2 and 3 for next item
5. After calibrating all effects, touch the [confirm] to save all adjusted values and reset the fixture.
Calibration of the effects via the DMX controller
1. Connect DMX controller to the fixture and enter the "Calibrate Effects" menu.
Calibration protocol:
Effect
Mode 1
Mode 2
Mode 3
Pan
channel
50
channel
34
channel
54
Tilt
channel 51
channel 35
channel 55
Ef. wheel
channel 52
channel 36
channel 56
Rot. Gobo Wheel
channel 53
channel 37
channel 57
R. Gobo Index 1
channel 54
channel 38
channel 58
R. Gobo Index 2
channel 55
channel 39
channel 59
R. Gobo Index 3
channel 56
channel 40
channel 60
R. Gobo Index 4
channel 57
channel 41
channel 61
R. Gobo Index 5
channel 58
channel 42
channel 62
R. Gobo Index 6
channel 59
channel 43
channel 63
R. Gobo Index 7
channel 60
channel 44
channel 64
Prism 1
channel 61
channel 45
channel 65
Prism 2
channel 62
channel 46
channel 66
Zoom
channel
63
channel
47
channel 67
Focus
channel 64
channel 48
channel 68
Iris
channel
65
channel
49
channel 69
Frost 1/1
channel 66
channel 50
channel 70
Frost 1/2
channel 67
channel 51
channel 71
Frost 2/1
channel 68
channel 52
channel 72
Frost 2/2
channel 69
channel 53
channel 73
Fr. Shutters rot.
channel 70
channel 54
channel 74
Fr. Shutter 1 Move
channel 71
channel 55
channel 75
Fr. Shutter 1 swiveling. channel 72
channel 56
channel 76
Fr. Shutter 2 Move
channel 73
channel 57
channel 77
Fr. Shutter 2 swiveling channel 74
channel 58
channel 78
Fr. Shutter 3 Move
channel 75
channel 59
channel 79
Fr. Shutter 3 swiveling channel 76
channel 60
channel 80
Fr. Shutter 4 Move
channel 77
channel 61
channel 81
Fr. Shutter 4 swiveling channel 78
channel 62
channel 82
Calibrate Fr. Hysteresis
Framing Lamella 1
- a framing lamella 1 reverse movement (value range: 0-8)
Framing Lamella 2
- a framing lamella 1 reverse movement (value range: 0-8)
Framing Lamella 3
- a framing lamella 1 reverse movement (value range: 0-8)
Framing Lamella 4
- a framing lamella 1 reverse movement (value range: 0-8)
The value set for every framing lamella gives a value at which the lamella reacts to its reverse
movement promptly (without movement hysteresis).
Calibrate Colours
- The menu serves for calibration of white colours in a factory. Do not change values in
the menu otherwise the menu item "Opto Corrections" will not run.
Green Corrections
- The menu allows you to correct calibrated whites 2700K, 3200K, 4200K, 5600K and
