Shutdown
39
NOTICE!
Pressure washers can damage the automatic feeder.
►
Only clean the automatic feeder by hand using a damp cloth.
12. Cover the automatic feeder with a tarpaulin. This will protect it from dirt.
8.2
Permanent shutdown
If you are going to permanently shut down the automatic feeder, you must dispose of it in ac-
cordance with the law. To find out which regulations apply to you, contact your waste disposal
company or a waste disposal center listed in the yellow pages.
In the appendix of the operating manual, you will find a list of the materials used to make the
automatic feeder (see 12.2 "Materials list" ).
1. Perform steps 2 to 13 of the shutdown (see 8.1 "Temporary shutdown" ). You do not have to
perform step 1 - cleaning.
2. Dispose of any residual cleaning agent. See the data sheet of the cleaning agent for infor-
mation on the disposal of the cleaning agent.
WARNING!
Chemical burns due to the cleaning agents used.
The cleaning agent can cause chemical burns to your eyes or hands.
►
Always wear safety glasses and protective gloves when using cleaning agents. Follow all
the safety instructions listed in the safety data sheet for the cleaning agent and wear the
specified safety equipment.
3. Dispose of the automatic feeder as described in the disposal chapter (see 10. "Disposal" ).
