15
2. Safety
•
Equipment, devices, tools, accessories, safety equipment,
etc. are complete and intact.
•
Inspection and maintenance work has been carried out
professionally and on schedule.
•
Operating fluids have been topped up (fuel, lubricants, etc.)
•
All prerequisites for carrying out work safely have been met
with regard to you and other persons, material property
and the environment.
►
Beware of the particular dangers of the product and your
work area, especially:
•
persons and obstacles,
•
adherence to safety clearances,
•
traffic on adjacent tracks,
•
secure fitting of all protective equipment,
•
compliance with all operationally necessary safety
measures.
►
Leaking operating fluids (oil, grease, etc.) must be removed
immediately to prevent a fire hazard or risk of slipping.
Keep suitable oil binding agents and cleaning agents at
hand.
►
Before leaving the product perform the following checks:
•
It has been shut down properly.
•
It is secured against moving unintentionally.
•
Tools and accessories are stowed away safely.
►
Use only machines, appliances and tools that work proper-
ly.
►
Rectify smaller faults straight away in order to avoid larger
faults.
Ensure the following to be able to provide First Aid in an emer-
gency:
►
Make sure that the First Aid kit is in proper condition, com-
plete and clean at all times.
►
Consult the medical service or doctor at your office regard-
ing First Aid measures and appropriate equipment.
►
Immediately replenish used up material.
►
Store First Aid equipment (First Aid kit, blankets etc.) and
fire extinguishers within easy reach.
►
Carry material for securing accident sites.
First Aid
Summary of Contents for 62.05L
