1
Part no. CB-209-1410 04/28/2021
Craft Series: Pivot Metal Mirror
© 2021 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
800.877.2376
www.robern.com
Installation instructions
CRAFT SERIES
PIVOT METAL MIRROR
Important safety instructions - Save these instructions
Tools Needed -
2
Parts -
2
Locating the Mounting Flange -
3
Hanging the Mirror -
4
Use and Maintenance -
5
Warranty -
5
CONTENTS
This instruction manual contains information on how to mount your Robern Craft Series mirror.
Save these instructions for future use and reference. An improper installation voids the warranty. Carefully inspect the mirror for
damage prior to installation. Installed products cannot be returned.
If you experience any problems with your Robern product, contact your dealer or Robern directly.
Professional installation is strongly recommended. For your safety, it is recommended that two people hang the
fi
xture. These
instructions are provided for your safety. It is important that they are read carefully and completely before installation of the
fi
xture.
Check with a professional to ensure your wall can tolerate a
fi
xture weighing 90 lb/ 41 kg. It is imperative that the mirror is mounted into
a wall stud.
Limited Warranty — One Year Term
GENERAL INFORMATION
CM2436H84
CM2436H88
