4
Part no. CB-209-1410 04/28/2021
Craft Series: Pivot Metal Mirror
© 2021 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
800.877.2376
www.robern.com
Installation instructions
HANGING THE MIRROR
4. Turn the hinge arm assembly into place using the center threaded hole in the mounting
fl
ange.
5. Lift the mirror into place between the two wall arms and insert the mounting bolt thru the wall arm assemblies and into the
threaded clip on the mirror.
6. Hand tighten
fi
nish caps into mounting bolts.
