11
© 2020 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
800.877.2376
www.robern.com
Installation instructions
Part no. 209-1289 rev. 03/10/20
Profiles Framed Cabinet
All parts required for surface mounting are included in the optional kit (see page 2). These instructions are for surface mounting.
Remove and store door with cardboard sleeve prior to installation.
1. It is strongly recommended that the wall be framed behind the drywall or tile.
2. Electrical field wiring: Electrical feed through location is indicated below. See page
5
for location. See page
7
for electric connection.
Make sure cabinet is at least 1” (25.4 mm) clearance to the top of the faucet and at least 1” from the ceiling.
SURFACE MOUNTING
2
1
Field Wiring
1" (25.4 mm)
Minimum door to faucet
1" (25.4 mm)
Minimum from finished ceiling
F
G
F
G
12" Cabinet
4-5/16"
(110 mm)
6-5/8"
(168 mm)
9-3/4"
(248 mm)
5-3/4"
(146 mm)
20" Cabinet
16" Cabinet
24" Cabinet