13
© 2020 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
800.877.2376
www.robern.com
Installation instructions
Part no. 209-1289 rev. 03/10/20
Profiles Framed Cabinet
6. Slide the three “Z” clips into the screw channel at the top of the cabinet; be sure that the “Z” clips lock into the grooves.
7. Lift the cabinet and place the cabinet onto the Z mounting bar.
8. Using the #10 X 2” (51 mm) screws provided, attach the top of the cabinet to the wall through the top clips as shown. If no stud is
available, use wall anchors as described in step 5b.
SURFACE MOUNTING
7
8-[SS672]
8-[SS676]
9
10
3x
6
#10 X
2” (51 mm)
[SS674]
8
9. Electric: See page 7 for electrical connection instructions. See Page 8 for electrical connection options.
10. Attach Optional Side Kit (sold separately) to cabinet using supplied screws from inside cabinet box into Side Kit. Test the fit of the
cabinet before completing installation. Cap the screws with the screw caps provided. Go to page 14 for final assembly.