14
© 2020 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
800.877.2376
www.robern.com
Installation instructions
Part no. 209-1289 rev. 03/10/20
Profiles Framed Cabinet
FINAL ASSEMBLY
1A-B. Mount the doors by pinching the end of the hinge as shown in image 1A. If the installation requires, attach the included hinge
clips [SS666] over the elbow of the hinges to stop door swing radius at 110°.
1B
1A
1A
2A
2B
2A-B. The cabinet doors have a three-way adjustment feature. Height, side-to-side level, and depth can all be adjusted using a #2
Phillips Head screwdriver. With the hinge slightly closed, you can access the middle screw. This screw will move your door front up and
down (see figure 5A). With the hinge fully extended, you can access the front and back screws. These screws will move your door front
from side to side and in and out (see figure 2B).