3
© 2020 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
800.877.2376
www.robern.com
Installation instructions
Part no. 209-1289 rev. 03/10/20
Profiles Framed Cabinet
When using an electrical furnishing, basic precautions should always be followed, including the following:
DANGER:
Read all instructions before using this cabinet.
WARNING:
To reduce the risk of burns, fire, electric shock, or injury to persons: Use this furnishing only for its
intended use as described in these instructions. Do not use attachments not recommended by the manufacturer. Never drop or insert
any object into any opening. Do not use outdoors.
WARNING:
Risk of electric shock. Connect this furnishing to a properly grounded circuit only.
See Grounding instructions.
CAUTION:
Maximum shelf load 34lbs/15.4kg
GROUNDING INSTRUCTIONS:
This product must be connected to a grounded metal,
permanent wiring system, or an equipment-grounding conductor must be run with the circuit conductors and connected to the
equipment-grounding terminal or lead on the product.
WARNING:
An Electrical option cabinet must be wired to a 20 Amp GFI (Ground Fault Interrupter) protected circuit
when used in bathrooms and all other locations required by the National Electric Code.
NOTES
Model Numbers
Use the chart below to learn how to build a Profiles Cabinet Model number. This chart references the model number
for a 24" W x 30" H x 4" D Profiles cabinet. Consult the Robern Price Book for a complete list of model numbers.
The model number is located inside of your cabinet.
P
C
24
30
D4
T
L
E 76
Product
P = Profiles
C = Cabinet
12 = 12"
/ 305 mm
16 = 16"
/ 406 mm
20 = 20"
/ 508 mm
24 = 24"
/ 610 mm
30 = 30"
/ 762 mm
40 = 39-3/8"
/ 1000 mm
48 = 48"
/ 1219 mm
D4 = 4-5/8"
/ 117 mm
D6 = 6-5/8"
/ 168 mm
T = 3/4" /
19 mm
L = Left
R = Right
N = Non-Handed
Depth
Width
Hinge Location
Category
Frame Width
Height
E = Electric
N = Non-Electric
76 = Chrome
77 = Polished Nickel
82 = Matte Gold
83 = Matte Black
Options
Metal Frame Finishes
MODEL NUMBERS
