5
© 2020 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
800.877.2376
www.robern.com
Installation instructions
Part no. 209-1289 rev. 03/10/20
Profiles Framed Cabinet
To remove, while supporting the door, release the lever under the hinge arm. Slide the door off and store in a safe place.
All wiring should be done by a qualified licensed electrician.
WARNING:
To reduce the risk of electrical shock, shut off power before wiring the cabinet.
CAUTION:
Requires 120 VAC 20 Amp GFI protected circuit.
CAUTION:
This product must be connected to a grounded, metal permanent wiring system or an equipment-grounding conductor must
be run with the circuit conductors and connected to the equipment grounding terminal or lead on the product.
WARNING:
An Electrical option cabinet must be wired to a 20 Amp GFI (Ground Fault Interrupter) protected circuit when used in
bathrooms and all other locations required by the National Electric Code. Make field connections as per wiring diagram for the electrical
option being installed.
REMOVING THE DOOR FOR EASE OF INSTALLATION
ELECTRIC CONNECTIONS
CIRCUIT BREAKER
DISJONCTEUR
CORTACICUITOS
WHITE
BLANC
BLANCO
GROUND
MISE À LA TERRE
BAJADA A TIERRA
BLACK
NOIR
NEGRO
WHITE
BLANC
BLANCO
GROUND
MISE À LA TERRE
BAJADA A TIERRA
BLACK
NOIR
NEGRO
FIELD CONNECTION
CONNEXION DE CHAMP
CONNEXIÓN DE CAMPO
120VAC
20A GFI
AiO Cabinet with or without OM™ Audio
AiO Cabinet avec ou sans OM™ Audio
Gabinete AiO con o sin OM™ Audio
LINE/BLACK
LIGNE/NOIR
LINEA/NEGRO
NEUTRAL/WHITE
NEUTRE/BLANC
NEUTRAL/BLANCO
Determine overall cabinet dimensions. If recessing cabinet, determine rough-in dimensions. See chart for specific model dimensions.
Profiles Cabinet