6
© 2020 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
800.877.2376
www.robern.com
Installation instructions
Part no. 209-1289 rev. 03/10/20
Profiles Framed Cabinet
ELECTRIC CONNECTIONS
TWO options for cabinet wiring are available. Select the best option to make your installation easier.
Option 1:
Connecting the FIELD/POWER wires at the rear of the cabinet.
Removing a small cover on the back of the cabinet allows FIELD/POWER wires to be fully connected through an access on the
rear of the cabinet. The cabinet is fully wired before mounting in/on the wall.
Option 2:
Connecting the FIELD/POWER wires inside the cabinet.
Removing the electronic shelf cover inside the cabinet allows the FIELD/POWER wires to be connected inside the cabinet.
Removal of the interior electrical shelf cover is required. The cabinet can be fully wired after mounting in/ on the wall.
Option 1
See page 9
Option 2
See page 10
OR