9
Part no. CB-209-1332 05/05/20
Vitality Cabinet
© 2020 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
800.877.2376
www.robern.com
Installation instructions
OPTION 2 - ELECTRIC CONNECTIONS
1. Remove the access screws in bottom of the electrical shelf (all instances). Lift up and remove for access to electrical connections.
NOTE:
Wiring access opening closest to hinge side of cabinet contains dimmer/switch connections.
2. Carefully cut plastic ties before making the connections.
3. Feed the field wiring through the access holes in the back of the cabinet.
4. Make all electrical connections as referenced in the electrical diagram on page 6.
5. Engage top of electrical shelf into back raceway and rotate down to close, making sure not to crimp or pinch wires and connections.
6. Reinstall two access screws into electrical shelf.
3
1
2
5
6
4" MAX
102 mm MAX
