37
Headphone socket
A 3.5mm
Headphone Socket
located on the rear of your radio is provided
for use with either headphones or an earpiece. Inserting a plug automati-
cally mutes the internal loudspeaker.
Please be aware that the sensitivity of headphones can vary widely. We
therefore recommend setting the volume to a low level before connecting
headphones to the radio.
IMPORTANT:
Excessive sound pressure from earphones and headphones
can cause hearing loss.
Auxiliary input socket
1. Connect a stereo or mono audio source (i.e. CD player, MP3 player,
etc.) to the
Auxiliary input
socket.
2. Press and release the
On/Off
button to switch on the radio.
3. Repeatedly press and hold the
Mode
button
until the display shows
'AUX IN'
.
4. Adjust
the
Volume
control on your player and on the radio for comfortable
listening.
5. Remove the cable from the
Auxiliary input
socket or press and hold
the
Mode
button
to cancel Auxiliary Input mode.
Note:
If the radio is in Auxiliary input mode with no input signal being
applied for more than 15 minutes then it will automatically switch to the
standby mode. The LCD will revert to the standby mode clock display. To
use the radio again, simply press the On/Standby button to switch it on.
1
2
3
