11
Dynamic Range Control (DRC) settings
DRC can make quieter sounds easier to hear when your radio is used
in a noisy environment.
1.
Press the On/Off button to switch on your radio.
2.
Press and hold in the Info button until display shows “Software.”
Release the Info button.
3.
Press Tuning UP button to select DRC value setting .
4.
Press the Select button to enter adjustment mode .
5.
Press the Tuning Up/Down buttons to select required DRC setting
(default is 0) .
DRC 0 DRC is switched off , Broadcast DRC will be ignored .
DRC 1/2 DRC level is set to 1/2 that sent by broadcaster .
DRC 1 DRC is set as sent by broadcaster .
6. Press and release the Select button to confirm the setting . The
display will return to radio mode.
Display backlight
1.
The display backlight will be switched on for approximately 12
seconds when any button is pressed.
2.
When your radio is powered by the AC adaptor the display backlight
will always be switched on.
2
3
4
5
5
6
