23
Operating your radio - Search tuning MW
1. For MW the unit uses the external loop antenna. Position and rotate
the loop antenna for best reception.
2. Press
the
On/Off button
[Standby button on front panel]
to switch on
your sound system.
3. Press and release the
Band button
[Band/Source button on front
panel]
to select MW band. The display will show the MW Tuner.
4. Press and immediately release the
Tuning Up button
, your radio will
scan in an upwards direction (low frequency to high frequency) and
stop automatically when it fi nds a station of suffi cient strength.
5. After a few seconds the display will update.
6. To fi nd other stations press and release the
Tuning Up button
as
before.
7. To scan the MW band in a downwards direction (high frequency to
low frequency) press and hold down the
Tuning Down button
for 0.5
seconds and then release.
8. When the waveband end is reached your radio will recommence tuning
from the opposite waveband end.
9. Adjust
the
Volume
to the required settings.
10. To switch off your radio press the
On/Off button
[Standby button on
front panel].
2
3
4,6
10
9
9
7
