23
Operating your radio - Search tuning MW
1. For MW there is a built in ferrite aerial. Rotate your radio for best
reception.
2. Press the
On/Off button
to switch on your radio.
3. Press and release the
Radio button
to select MW band. The display
will show the AM Tuner.
4. Press and immediately release the
Tuning Up button
, your radio will
scan in an upwards direction (low frequency to high frequency) and
stop automatically when it finds a station of sufficient strength.
5. After a few seconds the display will update.
6. To find other stations press and release the
Tuning Up button
as
before.
7. To scan the MW band in a downwards direction (high frequency to
low frequency) press and hold down the
Tuning Down button
for 0.5
seconds and then release.
8. When the waveband end is reached your radio will recommence tuning
from the opposite waveband end.
9. Adjust the
Volume and 3D Sound switch
to the required
settings.
10. To switch off your radio press the
On/Off button
.
2
3
4,6
10
2
9
9
9
7
Summary of Contents for MP-23
Page 52: ...51 Notes ...
Page 54: ...53 Notes ...
