If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
Automatic FM setup
When your radio is first connected to a power supply (batteries or mains)
or after a power failure (when backup batteries are not installed), the
Auto setup
will automatically search the FM waveband and store
stations in presets.
1. Install batteries or connect to mains (see page 6). Your radio will
show start searching the FM waveband.
2. Your radio will automatically switch off and return to time display
when setup is complete. (Setting the clock time is described on page
7)
3. Press the
On/Off button
to switch on your radio and press one of
the
Preset buttons
to select a station.
4. Adjust the volume using the
Volume control
. To switch off your
radio press the
On/Offbutton
.
Note:-
Auto setup
can take 3-4 minutes to complete and is depend-
ent on the signal strength and number of stations in your area.
To interrupt the
Auto setup
press and release the
Memo button
.
Should
Auto setup
fail, setting FM pre-setting stations can be
carried out manually as described in the following sections.
2
3
3
4
4
