8
Mains adaptor
1. Assemble either the UK or EU pins onto the mains power adaptor
to suit the mains sockets installed at your location.
2. Note that the rounded end of the pins section needs to engage
with the adaptor before the rectangular end.
3. It is important to check that the pins are fully secured to the
adaptor before it is used.
4. Plug the DC lead from the mains adaptor into the DC input socket
on the back of the turntable.
5. Plug the adaptor into a suitable mains socket.
The AC adaptor should be disconnected from the mains supply and
from the turntable when not in use.
IMPORTANT:
The mains adaptor is used as the means of connecting
the product to the mains supply. The mains socket and any multi-way
mains block used for the product must remain accessible during
normal use. In order to disconnect the product from the mains, the
mains adaptor should be removed from the mains socket completely.
Use only the mains adaptor provided with the product, or a genuine
replacement provided by Roberts Radio. The use of alternative
adaptors will invalidate the guarantee.
6. Switch on at the mains socket and then switch on using the
Power On/Off
switch next to the DC input socket.
33
RPM
SPEED
45
RPM
AUDIO
OUTPUT
PRE AMP
OFF ON
USB
AUTO STOP
OFF ON
POWER
ON
OFF
12V
0.5A
DC input socket Power On / Off switch
UK pins
EU pins
AC adaptor assembled
with UK pins
