83
Disabling alarms
1. To disable an alarm enter the alarm setup menu (see page 80) and rotate
the
Tuning/Select
control until the desired alarm is highlighted on the
display. Press the
Tuning/Select
control.
2. Rotate
the
Tuning/Select
control until the
'Enable:'
option is highlighted
on the display. Press the control.
3. Rotate
the
Tuning/Select
control to highlight
'Off'
and press the control.
4. Rotate
the
Tuning/Select
control until the
'Save'
option is highlighted on
the display then press the control to save the new setting. The chosen
alarm will now be disabled.
Controlling alarms in stand-by
When your radio is in stand-by the alarms can be controlled using the
Alarm
button. This avoids the risk of disturbance to someone who is asleep.
1. To change the states of the alarms when in stand-by press the
Alarm
button. The display will cycle through none, either and both alarms enabled.
2. To change the alarm settings while the radio is in stand-by,
press and
hold
the
Alarm
button. This will cause the
Alarms
menu to be displayed
(see page 80 step 3 onwards).
Snooze timer
1. The buzzer or radio alarm can be silenced for 5 minutes by pressing the
Tuning/Select/Snooze
control. Should you wish for a longer snooze
duration this can be extended. Pressing the control again while the radio
is snoozed will set the available snooze time to 5, 10, 15 or 30 minutes.
2. While the snooze timer is active the remaining snooze time is shown next
to the
fl
ashing alarm icon on the clock display.
3. In order to cancel the Snooze timer while the alarm is suspended, press
the
On/Off
button. The display will brie
fl
y show an
'Alarm Off'
message.
3
1-4
1
1,2
Summary of Contents for Stream 205
Page 102: ...101 Notes ...