background image

86

Information                 .

Audio codecs

Your audio system supports a range of audio codecs which provide compatibility with a wide range of Internet Radio stations.  These also allow users 

to stream music from their computers or to play directly from USB flash memory devices.
Note that for any given audio codec, there are many streaming protocols available, and thus even if an Internet Radio station uses a supported format, 

this does not guarantee that every such station will work with your audio system. The radio stations database to which your audio system connects is 

checked for compatibility so that most stations should be playable without problems. Similarly when streaming media from a computer, while a codec 

may be supported, there can be many subtle variations in formats, tagging schemes and protocols (even within UPnP). In general your audio system 

will play the supported formats with most common UPnP servers.
The following table summarises the maximum supported bit-rates for the various audio formats that are playable on your audio system. Higher rates 

may be playable in some cases but performance of the product may be affected.

  

Codec 

 

 

 

Maximum supported data rate

 

 

AAC (LC, HE, HE V2) 

 

320 kbits/sec

 

 

ALAC 

(1)

   

 

 

1.5 Mbits/sec

 

 

FLAC 

(2)

   

 

 

1.5 Mbits/sec

 

 

LPCM 

(3)

   

 

 

1.536 Mbits/sec

 

 

MP3 

 

 

 

320 kbits/sec

 

 

WAV 

(3)

   

 

 

1.536 Mbits/sec

  WMA 

(4)

   

 

 

320 kbits/sec

All codecs support 2-channel (stereo) coded files only.
All codecs support sample rates up to 48 k samples/sec (includes 32 k and 44.1 k samples/sec).
Files which have Digital Rights Management (DRM) protection applied will not be playable on your audio system.
(1) 16 bit samples are supported in ALAC files.
(2) 16 and 24 bit samples are supported in FLAC files.
(3) The maximum supported bit-rate is for 48 kHz sampling, 2 channels and 16-bits per sample.
(4) WMA Lossless, WMA Voice, WMA 10 Professional, and files which have DRM protection are not supported.
(5)  When  using  your  audio  system  as  part  of  a  group  of  multi-room  products,  audio  files  in  ALAC  and  FLAC  formats  will  only  play  on  the 

 

group  master 

(see page 31).

DAB

30

Summary of Contents for Stream 67





























































































Reviews: