USB mode
This section describes how to use your radio to access and playback your
audio
fi
les via USB memory devices.
The Swallow 2 has been tested with a range of USB memory devices up to
32GB. However there are many different USB memory devices available
and not all devices can be guaranteed to work in the Swallow 2. Memory
must use the FAT or FAT 32
fi
ling system in order to operate in the unit.
Important:
Your radio is designed to work with USB
fl
ash memory devices.
It is not intended to be connected to hard disk drives or any other type
of USB device.
Audio formats supported for playback are MP3 and WMA. Playback does
not support
fi
les encoded using WMA lossless, WMA voice, WMA 10
professional, nor
fi
les of any format which have DRM protection.
The USB socket is located on the rear right hand side of the radio.
Inserting and removing a USB memory device
1. Carefully insert a USB memory device into the USB socket. To remove
the USB memory device simply pull the device out.
Cautions
In order to minimise the risk of damage to your radio or USB memory
device, please place the unit so that the device cannot be easily knocked
while it is inserted in the socket.
Remove the USB memory device before carrying the unit or if not using
the USB feature for a prolonged period.
Switch the unit off before removing your USB memory device.
MONO/STEREO
FM MODE
USB
24
1
