OVERRIDE FAN OPERATION
NOTE:
Choosing a fan mode (
On
,
Auto
or
Intermittent
) with the Fan Menu overrides the fan choices made when you use the Main
Menu’s Schedule option. (See
PROGRAMMING THE THERMOSTAT
on page 12 and 13.)
Select
Menu
from the main screen.
Select
Fan
from the
Main Menu
.
The first item on the
Fan Menu
is
Fan Mode
.
Possible fan modes are:
On
– In this mode the fan is constantly on until a different fan mode is chosen.
Auto
– The fan operates when either the heating system or cooling system require it.
Intermittent
– Use this fan mode to circulate the air in your home between heating or
cooling cycles.
The fan operates similarly to Auto mode. When heating or cooling equipment is not active, the
fan circulates the air for
Intermittent On
(how long the fan will be on) and
Intermittent Off
(how
long the fan will be off) times you set. These times are set from the Fan Menu by selecting the
Intermittent On or Intermittent Off option and then using the
or
button to select the
desired amount of time.
Program
– In this fan mode, fan operation is determined by the programming done through the
Program Menu
. (For more information, see
PROGRAMMING THE THERMOSTAT
on page 12
and 13.)
Select this mode if the fan operation was overriden and you would like it to resume the
settings made in the original program.
11
Main Menu
Back
Select
Hold
Fan
Schedule
Time & Day
Fan Menu
Back
Select
Fan Mode
Auto
Intermittent On
5Min
Intermittent Off
20Min
