SYSTEM SETTINGS
page 3 of 5
Select
Service Intervals
to set service reminders for primary system components of the
heating/cooling system that need periodic attention.
Based on the intervals you set, these reminders are displayed on the main screen when a part
needs to be serviced:
Heating System Checkup Recommended
Cooling System Checkup Recommended
Heat Pump System Checkup Recommended
All service intervals can be set to
OFF
or for a period of 1-12 months.
When the main screen reminder appears, you can select either of
these choices:
Delay
– This is a 24-hour delay. The reminder appears again in
one day.
Reset
– This resets the service reminder. It will appear again at
the end of the interval that’s been set.
Cooling Limit
and
Heating Limit
.
To prevent extremes in thermostat settings, use this menu item to limit maximum cooling and
heating mode temperatures.
Choose either (or both) a cooling or a heating limit to set.
Set a temperature from 45ºF to 90ºF (7ºC to 32ºC).
21
System Settings Menu
Back
Select
Balance Points
Service Intervals
Cooling Limit
45°F
Heating Limit
90°F
Heating System
Checkup
Recommended
Delay
Reset
