12
TemporaryOverride
When the thermostat is running to a schedule, an override allows the
thermostat to function with a single setpoint for a time period.
A temporary override is entered as a setpoint for a number of hours.
1. Press
or
to display the flashing setpoint and the number
of hours.
2. Use
and
to change the setpoint.
3. Press SET TIME to move to the hours.
4. Use
and
to set the length of the override.
After 5 seconds the thermostat will start operation of the override. The
display will show room temperature, and the setpoint will alternate with
the number of hours remaining in the override.
The schedule will resume after the programmed override time expires.
Cancel the override by pressing START/STOP SCHEDULE.
DeterminingOperatingSetpoint
When the thermostat is using a schedule the temperature setpoint
originates from the schedule settings.
When one of the schedule overrides is active the setpoint has been
entered as part of the override.
Use the display to determine the origin of the current temperature setpoint.
Permanent Override – The day, time and “schedule” are not displayed.
Temporary Override – The display alternates hours of override with
setpoint.
Summary of Contents for RS6000
Page 15: ...15 NOTES...
