If you have done everything correctly, your thermostat
should power on and prompt you to start the setup.
Now, enjoy the savings and comfort of owning one of
the industry's best smart thermostats! The Robertshaw
Climate RS7210.
Ensure the C-wire is properly connected to the furnace
and thermostat. Properly secure and lock the furnace
door into place. Switch the power back on for the
heating/cooling system at the main switch box.
Power On and Enjoy!
5
clips
1
push
2
Firmly press forward to
secure it into position.
First, align the two clips on the back of the
thermostat into the corresponding slots on
the top of the wall plate.
4
Attach to the Wall
Use the enclosed screws and anchors
to mount the new wall plate. In most
cases, you can utilize the same
mounting position of your old
thermostat. Be sure to check the
alignment of your wall plate pre and
post installation of the thermostat unit.
Mount the New Wall Plate
3
PAGE 05
PAGE 06
