14
Emergency Heat Mode
The SMART 2000 thermostat will only use your emergency heating device
to maintain your desired heating temperature. This method of heating can
be quite expensive therefore it is not recommended to use emergency heat
mode unless it is essential. When your air conditioning system is heating
using emergency heat, the word E.HEAT in the LCD will change to the word
E.HEATING.
Cool Only Mode
The SMART 2000 thermostat will turn on Cooling when the room temperature
rises above the Cool setpoint. In Cool Only mode, the thermostat will NOT
turn on the Heating regardless of the room temperature and Heating setpoint
temperature. In Cool Only mode, only the word COOL will be displayed in the
LCD. When your air conditioning system is cooling, the word COOL in the LCD
will change to the word COOLING.
If the word COOL is flashing in the LCD the SMART 2000 is performing a safety
anti-cycle delay prior to restarting the Cooling.
Auto Changeover Mode
The SMART 2000 thermostat will turn ON the Heating if the room temperature
falls below the Heat setpoint temperature and the Cooling if the room
temperature rises above the Cool setpoint. This is the recommended mode as
it provides automatic control of the air conditioning system to maintain the
Summary of Contents for SMART 2000
Page 47: ...47...
