36
MANuAL MODE
On / Off and Mode Selection
Press the Mode button to cycle the thermostat through the available modes:
Heat, Cool, Auto mode (Shown by HEAT and COOL in the LCD), Emergency Heat (if
fitted), and OFF. If the Fan mode is set to FAN ON, when you select OFF mode the
Fan mode will automatically change to FAN AUTO.
NOTE:
Not all modes may be active on your thermostat.
Setting the Fan Function
Details on the fan control functions of the thermostat can be found on page 15
of this manual.
Setting the Clock
The thermostat is fitted with a real time clock. This clock is provided to display the
current time. It has no other function.
To set the clock, press and hold the PROG button for three seconds. The LCD will
show the Hours Digit flashing. Use the
p
or
buttons to adjust the hours to the
correct time (note the AM / PM symbol). Press the PROG button and now the
Minutes digits will flash. Adjust this value using the
p
or
buttons to show the
correct minute.
Summary of Contents for SMART 2000
Page 47: ...47...
