Setting the Personal Data
Press MODE to display Steps. Time of Day will appear in the lower row.
Press and Hold MODE for 3 seconds; 12 or 24 HR appears in the upper row of the display.
Select 12 or 24 Hour time format by pressing UP/RES. Then, press Mode again. The hour
flashes on the display.
Advance the hour by pressing or holding UP/RES. Repeat this sequence for setting MINUTES.
Press Mode again, KG (kilogram) or Lb. (pound) appears flashing. Select weight unit of
measure by pressing UP/RES. Repeat this process for setting weight value, stride length value
and Daily Step target goal value. Press MODE again and all values will be stored and the
display will return to Steps and Time of Day.
Notes: Once you have selected unit of measure for weight, the stride length unit of measurement
will automatically be selected. Setting the time of day is important since the M339’s 7 day
memory recall function automatically resets values to zero at Midnight to begin counting for the
next day.
Memory Recall Mode
The Robic M339 offers access to your results for Steps, Calories, Distance and Activity Time for
the previous 7 (seven) days.
Enter the Memory Recall function by pressing MEMO. Select which day you wish to review by
pressing MEMO again. The previous days, 1 through 7 (1 being yesterday and 7 being one week
ago today), will appear in sequence on the display. You may then view the day’s results by
pressing UP/RES. MEM appears above and DAYS BEFORE appears below the value 1-7.
Viewing the functions
Use “MODE” to move from one function to the next. The sequence is Steps, Distance, Calories,
and Activity Timer. In each case the indicator above the top row of the display will appear:
Step Counter—STEP indicator (on far right); Distance --MILE or KM; Calories—KCAL (on
right side) and Activity Timer—EXT and MIN.
