When active, the pacer count will appear in the box. For example, a count of 98 will be
indicated by “98” in the box. The counter adds on (1) for each beep emitted and will
count to 99, then reset to 00. Bar graph segments will fill in and disappear at the pacer
rate. To stop, while in Pacer mode, press (B) again. Then press (A) to reset counter to
zero.
IMPORTANT!
To maximize your battery life, use the PACER only when absolutely necessary!
The PACER will continue to sound while in other modes. Silencing the PACER requires
that you press (B) while in the PACER mode.
GENERAL OPERATION NOTES
1.
Upon entering any setting function, the timepiece will automatically return to
NORMAL TIME display if no pushbutton is activated within 3 minutes.
2.
You may rapidly advance or decrease digits in any setting function by pressing
and holding (A) (advance) or (B) (decrease).
3.
An audible beep confirmation tone will sound whenever a pushbutton is depressed, except
when the PACER is active.
4.
You may return to NORMAL TIME after setting or using any timekeeping mode by pressing
(C) upon completion.
5.
TIME OUT (PAUSE) TIMING: You may stop and re-start timing operations at any time
without loss of previously recorded data, as long as the timer has not been reset to zero.
VISIT OUR WEB SITE
www.robictimers.com
Feb 2011
