6
Operating instructions
Controls
RHWC90TB, RHWC60TG & RHWC90TG
The control panel is made up of black glass. Each function is represented by an icon, which when pressed will
activate the function. Each time it is pressed a “beep” will be heard.
Power
Once the appliance is connected to the power source, the icons will all light up for 1 second and turn off, leaving
the appliance in stand-by mode. Pressing an icon will light up an indicator light while the function is active, and
then turn off when the function is deactivated.
Lights
The light can be operated independently from the fan. Press the light icon once and the LED lights will turn on.
Press a second time and they will turn off.
Fan speed
The exhaust fan is operated by the slide icons. Pressing the slide icon will turn on the fan (the on/off delay icon
does not need to be pressed first). The power level is determined by the area pressed (to the left, low, to the
right, high, in 4 steps). The fan is turned off by pressing the on/off delay icon twice.
Timer
When the exhaust fan is in use, pressing the on/off delay icon once will set up a 3 minute delay, after which the
appliance will return to stand-by mode. NOTE: if the lights are on, these will turn off as well, but the function will
not work if only the lights are on.
